Nikon SB-30 User Manual

Make the necessary settings on the camera as with a normal Speedlight.

Set the SB-30’s Mode selector dial to Wireless slave flash (A).

• In wireless slave flash shooting, exposure compensation using the SB-30’s Exposure compensation switch

is not possible. In this case, make exposure compensation on the camera.

Set the master Speedlight’s flash mode to TTL auto flash.

• Be sure to cancel the master Speedlight’s Monitor Preflash (p. 21).
• If Monitor Preflash cannot be canceled, set the flash mode to other than the TTL auto flash mode.
• The D-TTL auto flash mode is not possible with the SB-30. With Digital SLRs cameras, set the flash mode to

Non-TTL auto flash or Auto Aperture flash.

Check the aperture and flash shooting distance, then shoot.

Basic operation

SB-30  -E  01.08    2002.12.26    17:23    ページ2 5