Tamron AFB005NII700 User Manual
ZOOMING
Rotate zooming ring (9) of the lens while viewing through the camera’s viewfinder and
compose your image at the chosen focal length.
ZOOM LOCK SWITCH
Zoom lock switch mechanism prevents lens barrels from extending toward long focal
length by their own weight while hanging from shoulders. Activate the switch at 18mm
setting to stop the lens barrels from rotating and extending.
How to activate the zoom lock switch mechanism
Rotate zooming ring (9) of the lens while viewing through the camera’s viewfinder and
compose your image at the chosen focal length.
ZOOM LOCK SWITCH
Zoom lock switch mechanism prevents lens barrels from extending toward long focal
length by their own weight while hanging from shoulders. Activate the switch at 18mm
setting to stop the lens barrels from rotating and extending.
How to activate the zoom lock switch mechanism
1. Locking: Set the lens to the 18mm position. Move the switch (11) toward the
camera, until the index lines align with each other. The lens barrel is now locked
in position and does not rotate or extend by its own weight.
in position and does not rotate or extend by its own weight.
2. Releasing: Push the switch away from your camera. The lens barrel is now free to
rotate and extend for zooming.
-The zoom lock switch cannot be activated unless the lens is set to the 18mm position.
Do not force the lock switch or try to rotate the lens barrel when locked.
-The lens can be used at 18mm setting for picture-taking even when locked by the switch.
-The zoom lock mechanism is made to prevent the lens barrel from extending while
carried around on shoulder. The lens may change its focal length during a long exposure
if the lens is used in a low or high angle position.
LENS HOOD
A bayonet-type lens hood is provided as standard equipment. We recommend shooting
with the hood attached whenever possible as the lens hood eliminates stray light, which is
harmful to the picture. However, please be aware of the precautions stated in the next
section when your camera is equipped with a built in flash.
Attaching the Lens Hood
Align Hood attaching alignment mark (2) on the hood with the corresponding index mark
(5) or the top of the index line of the distance scale of the lens. Press the hood lightly.
The lens hood will be secure when the mark “TAMRON O” is at the top. When attaching
the lens hood, hold the focus and zoom control rings, so they are not rotated
unintentionally.
-Pay particular attention to align the hood attaching indexes when using zoom lenses
including wide-angle setting. Improper attachment of a hood on a wide-angle zoom lens
may cause large shadowed areas in your pictures.
Stowing lens hood on the lens
Reverse the lens hood. Point the lens toward the opening, and then align the hood
attaching index on the lens with the “TAMRON O” alignment on the hood.
Turn the hood clockwise until the alignment mark is at the top to set it.
PRECAUTIONS IN SHOOTING