ARRI 416 User Manual

If the electronic format markings are not parallel to the fibre 

screen format markings, readjust the CCD chip with the 

rotation alignment screw, as shown in chapter 10.3.3 

Alignment of the image position (X-, Y- and Rotation) and 

focus.

Note: 

Only active frame lines can be positioned. If no 

frame line is on (FORMAT OFF), no position line 

can be reached with the cursor >. If Format 1 is 

on, only – POSITION 1 can be reached with 

the cursor >. Only if format 1 & 2 is selected, 

all - POSITION lines can be accessed.

It is possible to have no format marking (OFF), format 

marking number one (1), format marking number two (2) 

or both format markings at the same time (1 & 2) on 

display.

•  Move the cursor > with the keys Ê and Ë to the line 

– FORMAT. Pressing the key Í will switch from OFF to 

1 to 2 to 1 & 2 and back to OFF, the key Ì will switch 

in the opposite direction.

 

MENU FORMAT MARKING 

 

   - FORMAT         1&2 

-> - POSITION 1 Ö

   - POSITION 1 Ü

   - POSITION 2 Ö

   - POSITION 2 Ü

   - WHITE LEVEL    2

   - OUTSIDE        LIGHT 

 

   - EXIT