ARRI 416 User Manual

The insertion of VITC can be on single or multiple lines 

between lines 6 and 22. If the same line number is 

selected on both position 1 and position 2, the insertion 

will be single line; otherwise it will be multiple lines. The 

value of position 1 can be higher or lower than that of 

position 2.

•  Move the cursor > with the Ê and Ë keys to the line 

– POSITION 2. By pressing the Í key the value will be 

increased until line 22 is selected. By pressing the Ì 

key the value will be decreased until line 6 is reached.

Return to the main menu using Exit.

•  Move the cursor > with the Ê and Ë keys to the line 

– EXIT and press the Í or Ì keys.

Note: 

Pressing the Enter/Insert key Ñ for more than 

three seconds will cause the system to exit the 

on-screen programming mode completely, 

regardless of which menu is activated, with the 

exception of the positioning mode.

 

MENU VITC LINE 

 

   - VITC LINE      ON

   - POSITION 1     10

-> - POSITION 2     12

   - EXIT

 

MENU VITC LINE 

 

   - VITC LINE      ON

   - POSITION 1     10

   - POSITION 2     12

-> - EXIT