ARRI 416 User Manual

•  Turn the magazine so the throat is pointing upwards 

with the feed side facing you.

•  Push the loop to the left so all the slack is below the 

pressure plate.

•  The end of the loop must fall within the white line 

marked in the lower throat chamber 

a

.

•  If the loop length is not correct push down the button in 

the midlle of the lower sprocket and turn the sprockets 

against each other to alter the loop length. Make sure 

the sprocket engages properly again after changing 

the loop size. Check loop length again.

white line

lay-on roller arm

sprocket adjusting button