ARRI 416 User Manual

•  In Standby, briefly press the “PHASE” button to position 

the shutter so the mirror surface is protected from 

damage as far as possible 

a

.

•  Before exchanging the fibre screen, switch the camera’s 

main switch off and disconnect the camera from the 

power supply!

•  Remove the lens or the protective cap.

•  Using the special forceps (Hirschmann Clamp) from the 

camera‘s toolkit, pull the fibre screen 

a

 out of 

the holder by its tongue 

a

.

•  Check that both the fibre screen to be inserted and its 

frame are completely clean.

•  With the special forceps, push the chosen fibre screen 

into the holder as far as it will go. A sprung-ball catch 

fixes the fibre screen exactly in the right position.

•  Check that the fibre screen is correctly locked in place.

Note: 

Cleaning or exchanging the field lens is 

covered in Chapter 14 Maintenance, Cleaning 

the Field Lens.

phase button

tongue

fibre screen