ARRI ARRIFLEX 235 User Manual

If the electronic format markings are not parallel to the 

ground glass format markings, readjust the CCD chip with 

the alignment screw, as shown in chapter 10.3.3 Alignment 

of the image position (X-, Y- and Rotation) and focus

Note: 

Only active frame lines can be positioned. If no 

frame line is on (FORMAT OFF), no position line 

can be reached with the cursor >. If Format 1 

is on, only – POSITION 1 can be reached with 

the cursor >. Only if format 1 & 2 is selected, 

all - POSITION lines can be used.

It is possible to have no format marking (OFF), format marking 

number one (1), format-marking number two (2) or both 

format markings at the same time (1 & 2) on display.

•  Move the cursor > with the keys Ê and Ë to the line 

– FORMAT. Pressing the key Í will switch from OFF to 

1 to 2 to 1 & 2 and back to OFF, the key Ì will switch 

in the opposite direction.

 
MENU FORMAT MARKING 
 

->  - FORMAT 

1 

 

- POSITION 1 Ö

 

- POSITION 1 Ü

 

  POSITION 2 Ö

 

  POSITION 2 Ü

 

- WHITE LEVEL 

2

 

- OUTSIDE 

LIGHT

 
 

- EXIT