ARRI ARRIFLEX 235 User Manual

The throat assembly 

➪ 

 can be disassembled for 

cleaning.

•  Loosen the three screws 

➪ 

 on the throat 

assembly cover 

➪ 

.

•  Remove the holder plate 

➪ 

 for the loop 

protector.

•  Pull out the throat assembly cover.

•  Clean the film running surfaces 

➪ 

 and guide 

rollers 

➪ 

 with a brush.

•  Put the throat assembly cover back in place.

•  Replace the holder plate for the loop protector and re-

tighten the throat assembly cover with the three screws.

•  Swing the roller arm 

➪ 

 away from the winding 

shaft until it locks in place.

•  Unscrew the three screws on the transparent tensioning 

plate 

➪ 

.

•  Remove the plate.

•  Place a film core on the take-up side.

•  Place the core adapter 

➪ 

 on the feed-side.

•  Place the tension measurement device 

➪ 

 on the 

core adapter on the feed side.

screws

holder plate

guide rollers

running surfaces