ARRI ARRIFLEX 235 User Manual
38
38
• Insert the shutter tool
➪
photo
fully into the holes to
unlock the shutter blade and to hold the shutter in ist
position.
• Turn the movement inching knob to set the shutter to
the desired shutter opening. Make sure the shutter
registers properly at the set opening.
• Pull out the shutter tool.
Operation of the camera when the mirror
shutter is not correctly locked in position may
cause incorrect exposure!
shutter tool
Shutter Angle Measurement
• Holding the “PHASE“-button depressed in standby will
make the camera inch forward.
• The display shows the measured shutter angle in the
upper line. The lower line displays the voltage of the
power supply.
Camera Body