ARRI ARRIFLEX 235 User Manual

Note: 

Before the movement block is swung forwards, 

make sure that the film is correctly positioned in 

relation to the film gate over the entire area, 

otherwise the film may be damaged!

•  Turn the movement locking lever counter-clockwise as 

far as it will go. This will cause the movement block to 

swing forwards and to lock into position.

•  By turning the inching knob 

➪ 

, check that the 

film runs smoothly.

•  Close the camera door.

Note: 

Threading the film is also described and 

displayed on the inside of the camera door.

positioning pin

loop marking

movement locking lever

inching knob