ARRI ARRIFLEX 235 User Manual

Load Settings

It is possible to load one out of six settings. Those new settings

will inﬂuence all adjustments that can be made electronically.

The new settings will immediately replace the

previous settings. If the old settings might be

needed, store them ﬁrst as described in the next

chapter Store Settings.

• Move the cursor > with the keys Ê and Ë to the line

– LOAD SET. Pressing the key Í will switch from 1 to

2 all the way up to 6 and back to 1, the key Ì will

switch in the opposite direction. Pressing either the key

or Ì, will immediately load the new settings.

Store Settings

The set of settings, that are currently active, can be stored

as one out of six settings.

• Move the cursor > with the keys Ê and Ë to the line

– STORE SET. Pressing the key Í will switch from 1 to

2 all the way up to 6 and back to 1, the key Ì will

switch in the opposite direction.

• When the demanded number was reached, press the

Enter/Insert key Ñ to store this setting under the given

number. The word

DONE

will appear for 3 seconds

to indicate that the setting was stored. After this, the display

will return to its normal mode.

MENU LOAD/STORE

-> - LOAD SET

- STORE SET

(CONFIRM BY

ENTER)

- SET ALL

SETTINGS TO

DEFAULT

- EXIT