Hasselblad 10026 User Manual

DIS10.EPS

Lubricate carefully the washer (810840) with
oil. Lubricate with grease and fit (incl. the above
mentioned washer) the ratchet wheel (20924) into the
front section of the gear housing (30304).
Lubricate with grease and fit the gear wheel (13169).

Fit the locking ring (810938) and the activating hook
(20919), lubricate carefully with oil. Fit the spring
(816504) and the washer (810826).

Place the stop gear (13509) into the rear section of the
gear housing (13157).

Lubricate the shaft of the ratchet wheel (20924) and
put the front and rear section together.

Fit the mirror cam (22355) and secure with the screw
(821033).

Note! The position of the mirror cam (22355) relative
to ratchet wheel (20924).
Fig.11.

Ensure the auxiliary shutter release connecting rod
coupling and the control gear wheel move freely (i.e.
with no friction). Lubricate lightly with oil. Lubricate
the gear wheel’s cam with grease.

If it is necessary to replace the coil spring (30384) fit it
into the spring mounting on gear wheel (22699) as
shown in fig.12. Use a new spring, contained in its
plastic ring. Lubricate with grease.

20924

30304

810938

20919

812106

13169

816504

810826

13509

13157

22355

821033

810840