Axis Communications 18613 User Manual

ENGLISH ENGLISH

Open the Live View page in the web interface and make the following adjustments to the 
camera:

1. Loosen the locking screw and 

tilt adjustment screws.

2. Turn the lens to the desired 

position.

3. Once satisfied, gently tighten 

the locking screw and tilt 
adjustment screws to secure 
the camera’s position.

4. Turn the image balance ring 

to set the horizontal position.

5. Open the Focus Adjustment 

page in the Web interface 
under Basic Configuration > 
Focus and follow the on-
screen instructions. Use the 
image window to adjust the 
focus and zoom.

6. To set the focus and zoom, 

loosen the zoom and focus pullers anti-clockwise and rotate the rings. 

Due to the dome’s refraction, the image might appear slightly out of focus once 

the dome has been placed. To compensate, focus on  an object slightly closer than 
the inteded area. 

7. Lock the focus and zoom pullers in position by rotating the screws clockwise.

The image can also be fine-tuned for low lighting conditions. 
Go to Setup > Video & Image > Advanced and see the online help for more information.

1. Rotate the black protective shield inside the dome casing to match the camera’s position.
2. Clean the dome with a dry soft cloth to remove dust and finger prints and use a blower 

to remove dust from the lens.

3. Mount the dome casing using the supplied tamper-proof screws and screw driver.
4. Now that the dome is in place, double-check that the camera is properly focused.
5. The installation is now complete.

Image 

Focus puller

Zoom puller

screw

Tilt adjustment

screw

Tilt adjustment

balance 
ring

Locking screw