Axis Communications 18613 User Manual

1. Connect the camera to the network using a shielded network cable. 
2. Optionally connect external input/output devices, e.g. alarm devices. See page 14 for 

information on the terminal connector pins.

3. Optionally connect an active speaker and/or external microphone.
4. Connect power, using one of the methods listed below:

• PoE (Power over Ethernet). If available, this is automatically detected when the 

network cable is connected (see above).

• Connect the supplied indoor power supply to the power connector on the camera.

5. Check that the indicator LED:s indicate the correct conditions. See the table on page 15 

for further details. Note that some LEDs can be disabled and may be unlit.