Barco R5976666/01 User Manual
1. TLD HB (5.0-8.0:1) Lens Kit
3. Push the lens, motors at the top, in the lens block gap horizontally, lining up the motor connector on the lens with the connector
on the lens block (B), until the lens clicks in the lens anchor system.
Caution:
Caution:
For a table mounted projector, hold the projector when pushing the lens into the lens block to avoid sliding off from
the table.
the table.
Image 1-4
Lens installation
Lens installation
1.4 Quick Lens Adjustment
Quick zoom/focus adjustment
1. Press the Selection key
*, Barco key.
The zoom/focus menu will be displayed. (image 1-5)
2. Push the cursor key
↑ or ↓ to zoom and ← or → to focus the image.
3. When finished, press
EXIT key to return or ENTER to continue to the shift adjustment.
LENS ADJUSTMENT ZOOM/FOCUS
ZOOM with or ,
FOCUS with or
<ENTER> to shift
<EXIT> to return
FOCUS with or
<ENTER> to shift
<EXIT> to return
Image 1-5
Press the selection key * to switch to another pattern. Different patterns are available.
Quick shift adjustment
1. Press the Selection key
*, Barco key.
The zoom/focus menu will be displayed (image 1-5).
2. Press
ENTER.
The shift menu will be displayed. (image 1-6)
3. Push the cursor key
↑ or ↓ to shift the image up or down and ← or → to shift the image left or right.
4. When finished, press
EXIT key to return or ENTER to continue to zoom/focus.
R5976666 TLD HB (5.0-8.0:1) LENS KIT 22/12/2004
5