Olympus V204045SU000 User Manual
80
EN
7
Using OL
YMPUS V
iewer 2
1
Turn the camera off and connect it to the computer.
• The location of the USB port varies with the computer. For details, refer to your
computer’s manual.
2
Turn on the camera.
• The selection screen for the USB connection is
displayed.
3
Press
FG to select [Storage]. Press
Q.
USB
MTP
Storage
Print
Exit
Set
4
The computer recognizes the camera as a new device.
#
Cautions
• If you are using Windows Photo Gallery for Windows Vista or Windows 7, choose [MTP]
in Step 3.
• Data transfer is not guaranteed in the following environments, even if your computer is
equipped with a USB port.
Computers with a USB port added by means of an extension card, etc.
Computers without a factory-installed OS and home-built computers
Computers without a factory-installed OS and home-built computers
• Camera controls can not be used while the camera is connected to a computer.
• If the dialog shown in Step 2 is not displayed when the camera is connected, select [Auto]
• If the dialog shown in Step 2 is not displayed when the camera is connected, select [Auto]
for [USB Mode] (P. 88) in the camera custom menus.