JVC GR-AX860 User Manual
29
MAIN MENU
SUB MENU
= Factory setting
OFF
Disables the Shift Zoom function.
l50x
Magnifies wide-angle images to approximately 3.6 times the
Shift Zoom
original size, and enables zooming in the 18x – 50x range.
l140x
Magnifies wide-angle images to approximately 10 times the
original size, and allows zooming from 50x to 140x.
original size, and allows zooming from 50x to 140x.
Tele Macro
OFF
Usually set to this position.
lON
Usually the distance to a subject where the lens is in focus
depends on the zoom magnification. Unless there is a
distance more than 1m to the subject, the lens is out of focus
at the maximum telephoto setting. When set to “ON”, you
can shoot a subject as large as possible at a distance of
approx. 60 cm.
•Depending on the zoom position, the lens may go out of
depends on the zoom magnification. Unless there is a
distance more than 1m to the subject, the lens is out of focus
at the maximum telephoto setting. When set to “ON”, you
can shoot a subject as large as possible at a distance of
approx. 60 cm.
•Depending on the zoom position, the lens may go out of
focus.
Gain UP
AGC
Allows you to record a subject in a dark environment. It
delivers a brighter, if slightly coarse, picture.
delivers a brighter, if slightly coarse, picture.
l
A
(Auto Slow Shutter) Combines AGC with electronic shutter
speed (1/25 to 1/50) for shooting under much darker
conditions. When shooting in poorly lit areas, or when
shooting a dark subject in dim lighting, the unit will
automatically enter the Auto Slow Shutter mode, reducing
the shutter speed to 1/25 sec. Although the resulting picture
will be similar to that obtained when using Strobe (
speed (1/25 to 1/50) for shooting under much darker
conditions. When shooting in poorly lit areas, or when
shooting a dark subject in dim lighting, the unit will
automatically enter the Auto Slow Shutter mode, reducing
the shutter speed to 1/25 sec. Although the resulting picture
will be similar to that obtained when using Strobe (
Z
pg. 25),
the image will be clear with less noise.
lOFF
Allows you to shoot dark scenes with no picture brightness
adjustment.
adjustment.
Color Filter
NOR
For normal shooting with no colour adjustment.
lRED
Gives recording a reddish tint.
lBLUE
Gives recording a bluish tint.
Tape Length
Allows you to set the tape length depending on the tape used (
Z
pg. 10).
Title
Allows you to superimpose a preset title onto a scene (
Z
pg. 30).
Date/Time
Allows you to set the current date and time (
Z
pg. 9).
Tally/EL*
ON
The tally lamp comes on to signal the start of recording, and
the LCD window backlight comes on.
the LCD window backlight comes on.
*EL=
OFF
The tally lamp remains off at all times, as does the LCD
*
Electronic Luminance
window backlight.
Interval Timer and
These features allow you to set the parameters for Self-Timer (
Z
pg. 32),
Rec. Time
Animation and Time-Lapse recording (
Z
pg. 33).
JLIP ID NO.
This number will be necessary in the future when connecting the
camcorder to a device such as a computer using the JLIP terminal.
The numbers range from 01 to 99.
camcorder to a device such as a computer using the JLIP terminal.
The numbers range from 01 to 99.
NOTES:
● When the video light’s LIGHT ON/AUTO/OFF switch is set to “ON” or “AUTO”, Auto Slow Shutter is disabled.
● When Auto Slow Shutter is activated, Auto Focus may not work properly.