JVC GR-DVX10 User Manual

 EN

Following the illustration, connect the camcorder and
the VCR. Also refer to pg. 56 and 57.

Set the camcorder’s POWER Switch to “

”

while pressing down the Lock Button located on the
switch, turn on the VCR’s power, and insert the
appropriate cassettes in the camcorder and the VCR.

[For GR-DVX10 owners only]
Set “AV/S-VIDEO” to “OUT” in the Menu Screen
(

墌

 pg. 41).

Engage the VCR’s AUX and Record-Pause modes.

Engage the camcorder’s Play mode to find a spot just
before the edit-in point. Once it is reached, press
4

/6 on the camcorder.

Press 4/6 on the camcorder and engage the VCR’s
Record mode.

Engage the VCR’s Record-Pause mode and press
4

/6 on the camcorder.

Repeat steps 5 through 7 for additional editing, then
stop the VCR and camcorder when finished.

● When connecting the cables, make sure to connect the

● You can use the AV OUT connector on the camcorder for

connection.

● You can use Playback Zoom (

墌

 pg. 68) or Playback

Special Effects (

墌

 pg. 69) in step 5.

● Before you start dubbing, make sure that the indications do

not appear on the connected TV. If they do, they are being
recorded onto the new tape.

● Set the video out select switch of the cable adapter as required:

Y/C

: When connecting to a TV or VCR which accepts

Y/C signals and uses an S-Video cable.

CVBS : When connecting to a TV or VCR which does not

accept Y/C signals and uses an audio/video cable.

To choose whether or not the following displays appear on
the connected TV . . .
• Date/Time

..... set “DATE/TIME” to “AUTO”, “ON” or “OFF” in the

Menu Screen (

墌

 pg. 41).

• Time Code

..... set “TIME CODE” to “ON” or “OFF” in the Menu

Screen (

墌

 pg. 41).

• Playback Sound Mode, Tape Speed And Tape Running Displays

..... set “ON SCREEN” to “LCD” or “SIMPLE” in the Menu

Screen (

墌

 pg. 41). Or, press DISPLAY on the remote

control.

* Connect when an S-Video cable is not used.

Cable Adapter
(provided)
If your VCR has a
SCART connector,
use the provided
cable adapter.