JVC GY-HM150U User Manual
44
1
ABACKUPB display appears on the status display screen.
2
Start backup recording. (Backup recording in slot B)
and press the center of the set lever. (
● Backup recording into slot B starts. (The characters
ABACKUPB appear in red.)
● The card slot mark of slot B turns red (selected state), and
the status indicator of slot B also blinks in green.
3
Start normal recording. (Normal recording in slot A)
● Press any of the [REC] buttons.
● Recording into the media in slot A starts. (The characters
ARECB appear in red.)
● The card icon of slot A turns red (unselected state), and the
status indicator of slot A also blinks in green.
4
Stop normal recording.
● Press any of the [REC] buttons again.
● Recording to slot A stops, and the card slot mark of slot A
turns white (unselected state).
(white).
● The status indicator of slot A goes out.
5
Stop backup recording.
and press the center of the set lever. (
● Recording to slot B stops, and the card slot mark of slot B
turns white (unselected state).
● The characters ABACKUPB changes back to white.
● The status indicator of slot B lights up in green.
Memo :
● During backup recording, if the space of one card runs
out, recording stops only for the card that is full.
● When recording to both slots is stopped, recording in the
Regen mode will be enabled for the card slot in which
recording started.
recording started.
● When recording is started in the other slot while recording to
one slot, the clip being recorded is split and simultaneous
recording to the other card starts.
recording to the other card starts.
● When recording is stopped for either slot A or B while
recording to both slots, the clip on the slot which is still
recording is split.
recording is split.
● Although the clips are separated in this case, the clips can
be seamlessly joined by arranging them on the timeline of
the editing software since they are recorded seamlessly.
the editing software since they are recorded seamlessly.
● Clip Cutter Trig cannot be performed during backup
recording. (
● When [Slot Mode] is set to ABackupB, [Rec Mode] can
STATUS 1 Screen
ABACKUPB Display
Red
Red (selected state)
Red (unselected state)
White (unselected state)
White
GY-HM150U.book Page 44 Monday, September 5, 2011 1:48 AM