JVC 0104-FO-ID-PJ User Manual
VIDEO PLAYBACK
EN
15
MasterPage: Video_Right
The Full-Function Remote Control Unit can operate this
camcorder from a distance as well as the basic
operations (Playback, Stop, Pause, Fast-Forward and
Rewind) of your VCR. It also makes additional playback
functions possible. (
camcorder from a distance as well as the basic
operations (Playback, Stop, Pause, Fast-Forward and
Rewind) of your VCR. It also makes additional playback
functions possible. (
Installing The Battery
The remote control uses one
lithium battery (CR2025).
lithium battery (CR2025).
1
Pull out the battery holder
by inserting a pointed
instrument into the slot.
instrument into the slot.
2
Insert the battery in the
holder, and be sure to have
the “+” mark visible.
the “+” mark visible.
3
Slide the holder back in
until you hear a click.
Beam Effective Area
(indoor use)
(indoor use)
When using the remote control,
be sure to point it at the remote
sensor. The transmitted beam’s
approximate effective distance
for indoor use is 5 m (16 ft).
be sure to point it at the remote
sensor. The transmitted beam’s
approximate effective distance
for indoor use is 5 m (16 ft).
NOTE:
The transmitted beam may not be
effective or may cause incorrect
operation when the remote sensor
is directly exposed to sunlight or powerful lighting.
effective or may cause incorrect
operation when the remote sensor
is directly exposed to sunlight or powerful lighting.
Buttons And Functions
A
Infrared beam transmitting window
The following buttons are available only when the
camcorder’s Power Switch is set to “PLAY”.
camcorder’s Power Switch is set to “PLAY”.
B
AUDIO Button ..................................... (
C
PAUSE Button* .......................................... (
Up Button .................................................. (
D
SLOW Rewind Button ................................ (
E
REW Button* ....................................... (
Left Button ................................................ (
F
INSERT Button .......................................... (
G
STOP Button* ...................................... (
Down Button ............................................. (
H
SHIFT Button ............................................ (
I
EFFECT ON/OFF Button .......................... (
J
EFFECT Button ........................................ (
K
SLOW Forward Button............................... (
L
FF Button* ........................................... (
Right Button .............................................. (
M
PLAY Button* ....................................... (
N
A. DUB Button ........................................... (
O
DISPLAY Button ................................. (
The following buttons are available when the camcorder’s
Power Switch is set to “A” or “M”.
Power Switch is set to “A” or “M”.
a
S.SHOT (Snapshot) Button*
b
START/STOP Button*
c
Zoom (T/W) Buttons** ........................ (
*
Functions the same as each corresponding button on the
camcorder. (
camcorder. (
** Functions when the camcorder’s Power Switch is set to
“PLAY” as well.
Playback Using The Remote Control
1
1
2
3
Slot
Remote sensor
T
W
GR-D94US.book Page 15 Monday, November 17, 2003 2:12 PM