Olympus 227475 User Manual

EN

This camera uses one Olympus lithium ion 
battery (LI-80B). No other type of batteries can 
be used.

 Caution:

There is a risk of explosion if the battery is 
replaced with the incorrect battery type.
Dispose of the used battery following the 
instructions. (p. 52)

Power consumption by the camera varies 
depending on which functions are used.
During the conditions described below, power 
is consumed continuously and the battery 
becomes exhausted quickly.

The zoom is used repeatedly.
The shutter button is pressed halfway 
repeatedly in shooting mode, activating the 
auto focus.
A picture is displayed on the monitor for an 
extended period of time.
The camera is connected to a computer or 
printer.

Using an exhausted battery may cause the 
camera to turn off without displaying the 
battery level warning.
The rechargeable battery is not fully charged 
at the time of purchase. Before use, charge 
the battery fully with the supplied F-2AC 
USB-AC adapter (hereafter referred to as AC 
adapter).
When the included AC adapter is used, 
charging usually takes approximately 4 hours 
(varies on usage).
The included AC adapter has been designed 
to be used only for charging. Make sure that 
operations such as shooting, viewing images 
and so on are not being used while the AC 
adapter is connected to the camera.
The included AC adapter is designed to be 
used only with this camera. Other cameras 
cannot be charged with this AC adapter.
Do not use with other devices.
For plug-in type AC adapter:
The included AC adapter is intended to be 
correctly orientated in a vertical or fl oor mount 
position.

Wipe gently with a soft cloth. If the camera is 
very dirty, soak the cloth in mild soapy water 
and wring well. Wipe the camera with the 
damp cloth and then dry it with a dry cloth. If 
you have used the camera at the beach, use a 
cloth soaked in clean water and wrung well.

Wipe gently with a soft cloth.

Blow dust off the lens with a commercial 
blower, then wipe gently with a lens cleaner.

Wipe gently with a soft, dry cloth.

  Do not use strong solvents such as benzene 

or alcohol, or chemically treated cloth.

  Mold may form on the lens surface if the 

lens is left dirty.

When storing the camera for extended 
periods, remove the battery, AC adapter and 
card, and keep in a cool, dry place that is well 
ventilated.
Periodically insert the battery and test the 
camera functions.

  Avoid leaving the camera in places where 

chemical products are handled since this 
may result in corrosion.