Fujifilm FinePix A205 User Manual

23

22

In a shot with this type of composition, the subjects
(two people in this case) are not in the AF frame. If
the shot is taken at this point, the subjects will not
be in focus.

Move the camera slightly so that one of the
subjects is in the AF frame.

Without moving the camera, press the Shutter
button down halfway (AF/AE lock). Focusing is
complete when the AF frame on the LCD monitor
shrinks and the viewfinder lamp (green) stops
blinking and remains lit.

Continue to hold the Shutter button down halfway
(AF/AE lock). Move the camera back to the original
image and then fully press down on the Shutter
button.

●

You can reapply the AF/AE lock as many times as you like
before releasing the shutter.

●

The AF/AE lock operates in all photography modes and can
be used to ensure excellent results.

◆

◆

On the FinePix A205/A205S/A210, when you press the Shutter button down half way, the focus and
exposure settings are fixed (AF/AE lock). If you want to focus on a subject that is off to one side of the
image or if you want to set the exposure before you compose the final shot, lock the AF and AE
settings and then compose and shoot your picture to get the best results.

1M

A

   ３３

   ３３ 

1M

A

   ３３

   ３３ 

Zoom in and out by pressing “a (

[

)” and “b (

]

)” respectively.

When zooming switches between optical and digital, the “

■ ” indicator stops. Pressing the same

zoom button again starts the “

■ ” indicator moving again.

The position of the “

■ ” indicator on the zoom bar

shows the zooming status.

h If the “

■ ” is below the dividing line, the optical

zoom is being used. If it is above the line, the
digital zoom is being used.

●

See P.30 for information on changing the quality mode setting.

●

If the shot goes out of focus during zooming, hold the Shutter
button down halfway to refocus the shot.

●

The digital zoom can only be used for shots taken using the
LCD monitor.

●

This camera features 5 levels of zoom magnification.
However, due to the lens performance characteristics, the
intervals between the 5 levels are not equal. Note also that
the zoom speed varies slightly close to the maximum
telephoto setting.

Turn the modo switch to “

q

” to set “Framing

Guideline”.
The LCD monitor display changes each time you
press the “DISP” button. Press the “DISP” button
until “Framing Guideline” appears.

Use this frame with main subject positioned at the intersection of
two lines or align one of the horizontal lines with the horizon.
This frame allows you to compose your own shots while
remaining aware of the subject's size and the balance of the shot.

●

The framing guideline is not recorded on the image.

●

The lines in the scene frame divide the recorded pixels into 3 roughly equal
parts horizontally and vertically. When the image is printed, the resulting print
may be shifted slightly from the scene frame.

h Optical zoom focal length (35 mm camera equivalent)

Approx. 36 mm-108 mm, Maximum zoom scale: 3

×

h Digital zoom focal lengths (35 mm camera equivalent)

   

   ３３

３３

1M

1M

A

Optical

zoom

Digital

zoom

“      ” is selected by 
FinePix A210 only.

◆

◆

Always use AF/AE lock when composing a shot.
The image may not be focused correctly if you do
not use AE/AF lock.

■ FinePix A210

Cannot be used

Equivalent to approx. 108 mm-138 mm

Equivalent to approx. 108 mm-173 mm

Equivalent to approx. 108 mm-346 mm

1.28

×

1.6

×

3.2

×

3
2
1
`

■ FinePix A205/A205S

Cannot be used

Equivalent to approx. 108 mm-135 mm

Equivalent to approx. 108 mm-270 mm

1.25

×

2.5

×

2
1
`

SHOOTING STILL IMAGES (a AUTO MODE)