Ricoh 06578 User Manual
1
12
Introduction
t Memo
• The items that can be selected vary depending on the current
camera setup.
• If no operations are made within 1 minute while the control
panel is displayed, the camera returns to standby mode.
• You can change the display color of the status screen, control
panel and menu cursor in [Display Color] of [LCD Display] in
the D1 menu. (p.23)
You can change the type of information displayed in standby
mode by pressing G while the control panel is displayed.
Use CD to select the type and press E.
When shooting with the viewfinder
When shooting with Live View
t Memo
• The status screen is always displayed when the camera is
turned off and on again. If [Shooting Info Display] is set to [On]
in [Memory] of the A4 menu, the screen selected on the
Shooting Info Display selection screen appears when the
camera is turned off and on again. (p.81)
12 Peripheral Illumination
13 Diffraction Correction
15 AF Mode (p.49)/Contrast
18 High-ISO NR (p.46)
19 Slow Shutter Speed NR
21 JPEG Recorded Pixels
23 Shake Reduction (p.20)/
25 Framerate (p.38)
26 Recording Sound Level
27 Current date and time
Shooting Info Display
Status Screen Displays the settings for shooting with the
Display Off
Nothing is displayed on the monitor.
Electronic
Compass
The current latitude, longitude, altitude,
direction, Coordinated Universal Time (UTC),
capture mode, and exposure value are
displayed. Turn the camera off and on again to
return to the status screen.
Available only when the optional GPS unit is
attached to the camera and is operating. (p.94)
Standard
Information
Display
The Live View image and the settings for
shooting with Live View are displayed. (p.11)
No Information
Display
Certain icons, such as those for the capture
mode and drive mode, are not displayed.
e_kb558_om.book Page 12 Tuesday, September 16, 2014 11:59 AM