Ricoh 06578 User Manual

3

43

Shooting

t Memo

• The settings for exposure can be specified in increments 

of 1/3 EV steps. In [1 EV Steps] of the E1 menu, you can 

change the adjustment steps to 1/2 EV steps.

• A proper exposure may not be obtained with the selected 

shutter speed and aperture value when the sensitivity 

is set to a certain sensitivity.

• In L mode, the difference from the proper exposure is 

displayed on the EV bar scale while exposure is adjusted.

• In M mode, [Drive Mode] cannot be set to [Continuous 

Shooting] or [Exposure Bracketing].

• You can set the function of the M button for when the camera 

is in L/K mode. Set in [Button Customization] 

of the A4 menu. (p.79)

• When shooting with a low shutter speed, you can reduce 

image noise from the control panel or [Slow Shutter Speed 

NR] of the A2 menu.

The compensation value can be set between -5 and +5 EV 

(-2 and +2 EV in C mode).

1

Press J, and then turn V.

e and the compensation value 

are displayed on the status 

screen, Live View screen, and in 

the viewfinder during adjustment.

Available operations

Auto

Applies Noise Reduction according to the shutter 

speed, sensitivity, and internal temperature of 

the camera.

On

Applies Noise Reduction when the shutter speed 

is slower than 1 second.

Off

Does not apply Noise Reduction at any shutter 

speed.

Checking the Depth of Field (Preview)
When [Optical Preview] or [Digital Preview] is assigned to M 

in [Green Button] of [Button Customization] in the A4 menu, 

you can check the depth of field before taking pictures. 

EV Compensation

J

Starts/ends adjusting the compensation value.

M

Resets the adjustment value to the default 

setting.

e_kb558_om.book  Page 43  Tuesday, September 16, 2014  11:59 AM