Manualsbrain.com
  1. Manuals
  2. Brands
  3. Ricoh
  4. 06578
  5. User Manual

Ricoh 06578 User Manual

Download
Page of 122
3
50
Shooting
4
Press F.
The camera returns to standby mode.
t Memo
• The following settings for autofocus operation can be set 
in the E3 menu.
• In [18 Hold AF Status], you can set whether to immediately 
reactivate autofocus or to maintain the focus for a certain 
amount of time before activating autofocus when the subject 
happens to move out of the selected focusing area after being 
focused. The default setting is to immediately activate 
autofocus when focusing is unsuccessful.
• In S mode, [AF Mode] is fixed to x or y depending 
• In R mode, [AF Mode] is fixed to z.
1
Press G in standby mode.
2
Select [AF Active Area] and press E.
The [AF Active Area] screen appears.
3
Select the desired focus 
point selection mode 
and press E.
The control panel reappears.
15 AF.S Setting
Focus-priority, Release-priority
16 1st Frame Action 
in AF.C
Release-priority, Auto, Focus-priority
17 Action in AF.C 
Continuous
Focus-priority, Auto, FPS-priority
18 Hold AF Status
Off, Low, Medium, High
Selecting the Focusing Area (AF Point)
v/A1
6
Auto (11 AF 
Points)
Out of the 11 AF points, the camera 
automatically selects the optimum 
focusing area.
7
Auto (5 AF 
Points)
Out of the 5 AF points, the camera 
automatically selects the optimum 
focusing area.
E Select
Sets the focusing area to the user 
selected point from 11 points.
8 Expanded 
Area AF
Sets the focusing area to the user 
selected point from 11 points. When 
the subject happens to move out of the 
selected focusing area after being 
focused, 8 peripheral points are used 
as back-up points.
Not available in x mode.
D Spot
Sets the focusing area to the center of 
the 11 points.
AF Active Area
AF Active Area
Auto (11 AF Points)
Auto (11 AF Points)
Cancel
Cancel
OK
OK
e_kb558_om.book  Page 50  Tuesday, September 16, 2014  11:59 AM