Ricoh 06578 User Manual
3
53
Shooting
You can precisely fine tune your lenses with the camera’s
autofocus system.
1
Select [25 AF Fine Adjustment] in E4 menu and
press D.
The [25 AF Fine Adjustment] screen appears.
2
Select [Apply All] or [Apply One] and press E.
3
Select [Setting] and adjust
the value.
Available operations
4
Press E.
The adjustment value is saved.
5
Press F twice.
The camera returns to standby mode.
You can choose from the following drive modes.
u Caution
• There are restrictions on some drive modes when used
in some capture modes or in combination with some other
t Memo
• Only 4 (Remote Control Off) or Q can be selected in
C
mode.
• The Drive Mode setting is saved even after the power is
turned off. If [Drive Mode] is set to [Off] in [Memory] of the A4
menu, the setting returns to Single Frame Shooting when the
power is turned off. (p.81)
AF Fine Adjustment
E4
Apply All
Applies the same adjustment value to all lenses.
Apply One Saves an adjustment value for the lens being
used. (Up to 20 values)
D/V to the right
Adjusts the focus to a closer position.
C/V to the left
Adjusts the focus to a farther position.
M
Resets the adjustment value to the
default setting.
±0
±0
±0
±0
3
3
25
25 AF Fine Adjustment
AF Fine Adjustment
Apply One
Apply One
Setting
Setting
Reset Individual Settings
Reset Individual Settings
OK
OK
Cancel
Cancel
Setting the Drive Mode
Z
Single Frame Shooting
(L)
Normal capture mode
Continuous Shooting
(Z/b)
Continuously takes pictures while
0 is kept pressed.
The framerate varies according to
the shutter speed.
Self-timer
(O/P)
Releases the shutter about
12 seconds or 2 seconds after
0 is pressed.
Remote Control
(Q/R)
Enables shooting with remote
control.
Select from [Remote Control] or
[Remote Control (3 sec. delay)].
Exposure Bracketing
(T)
Takes three consecutive images at
different exposure levels.
e_kb558_om.book Page 53 Tuesday, September 16, 2014 11:59 AM