Ricoh 06424 User Manual

Playback

When you take pictures with the camera held vertically, image

rotation information is saved when shooting. When [Auto Image

Rotation] in the B1 menu is set to [On], the image is

automatically rotated based on the rotation information during

playback (default setting).

The rotation information of an image can be changed by

following the procedure below.

Display the image to edit in single image display.

Select a in the playback mode palette.

The selected image is rotated in 90° increments

and the four thumbnail images are displayed.

Use ABCD to select the

desired rotation direction and

press E.

The image rotation information is

saved.

u Caution

• When [22 Save Rotation Info] is set to [Off] in the E4 menu,

image rotation information is not saved when shooting.

• You cannot change the rotation information in the following

cases.

• Protected images

• Images without a rotation information tag

• Movie files cannot be rotated.

Connect to an AV device, such as a TV, equipped with an HDMI

terminal to display Live View images while shooting or to play

back images in playback mode.

Make sure to have a commercially available HDMI cable

equipped with an HDMI terminal (type D).

Turn the AV device and camera off.

Open the terminal cover of the camera, and connect

the cable to the HDMI terminal.

Connect the other end of the cable to the input

terminal on the AV device.

Turn the AV device and camera on.

The camera turns on in HDMI mode, and the camera

information is displayed on the screen of the connected AV

device.

Displaying Rotated Images

Cancel

Connecting the Camera to an AV Device

e_kb558_om.book Page 68 Tuesday, September 16, 2014 11:59 AM