Ricoh 06493 User Manual

Playback

u Caution

• While the camera is connected to an AV device, nothing is

displayed on the camera monitor. Also, you cannot adjust the

volume on the camera. Adjust the volume on the AV device.

t Memo

• Check the operating manual of the AV device and select

a suitable input terminal for connecting the camera.

• If you intend to use the camera continuously for a long period,

use of the optional AC adapter kit is recommended.

• By default, the maximum resolution supported by both the AV

device and camera is automatically selected. If it fails to play

back images properly, change the setting in [HDMI Out] of the
D

2 menu.

Connect the camera to a computer using an USB cable.

Make sure to have a commercially available USB cable

equipped with a micro B terminal.

Turn the computer on.

Turn the camera off.

Open the terminal cover

of the camera, and connect

the USB cable to the USB

terminal.

Connect the USB cable to the USB port

of the computer.

Turn the camera on.

The camera is recognized as a removable disk.

The grip lamps of the camera blink slowly while the camera

is connected with the computer via USB cable.

Save the captured images to the computer.

Disconnect the camera from the computer.

Connecting the Camera

to a Computer

e_kb558_om.book Page 69 Tuesday, September 16, 2014 11:59 AM