SVAT Electronics IP300 User Manual

 
Select the WebCAM on the right display screen, and then click “IP Configuration”. 
This will bring up the IP Address Configuration window. There are two tabs; 

• IP 

Address 

•  Advanced (for port setting configuration) 

 

Use this section to set the IP Address of WebCAM. 
 
When using WebCAM for the first time, it is advisable to choose the “Using Static IP 
Address” option.    For this option, the user will have to enter an IP Address, Subnet 
Mask and Gateway of their choice (refer to Appendix C for IP address explanation). 

 

Fig.9.  IP Configuration: Set an IP Address for WebCAM 

Once the IP Address is set, you will be able to connect to WebCAM webpage by 
entering this IP Address into a standard browser. 
 
“Obtain an IP address by DHCP or BOOTP” 
The IP address, Subnet Mask and Gateway is acquired directly and assigned 
automatically by the system. 
 

This section sets security password against unauthorised access to devices through 
Utility.