Sigma C72900 User Manual
38
TO REMOVE THE CARD
1
Turn off the camera and open the Battery
/ Card Cover, as shown in the illustration.
/ Card Cover, as shown in the illustration.
2
Push the card until it clicks and pull out it.
3
Close the Battery / Card Cover.
Slide the Battery / Card Cover in the
direction shown by the arrow until it clicks
and be locked.
Slide the Battery / Card Cover in the
direction shown by the arrow until it clicks
and be locked.
CAUTION !!
•
Never do any of the following while the Busy Lamp is on. (The Busy
Lamp indicates when the camera is writing, reading, or erasing images
from the card. Doing any of the following may cause the image data to
be lost or corrupt.)
Lamp indicates when the camera is writing, reading, or erasing images
from the card. Doing any of the following may cause the image data to
be lost or corrupt.)
1.
Do not remove the card.
2.
Do not remove the battery.
3.
Do not apply shock or vibrations to the camera.
TIP
•
If the camera is turned off while the Busy Lamp is on, the camera will
remain on until it has finished accessing the card.
remain on until it has finished accessing the card.