Sigma C72900 User Manual
64
FLASH EXPOSURE COMPENSATION
It is possible to compensate the flash output level without changing
the background’s exposure.
the background’s exposure.
1
Press the
button after ejecting the flash by
using the Flash Pop-up lever. (The Allocate
function guide will be displayed on the bottom of
the LCD monitor. The
function guide will be displayed on the bottom of
the LCD monitor. The
icon and the orange
compensation value will be displayed in the
upper-left corner of the LCD.)
upper-left corner of the LCD.)
• It is not possible to set the Flash Exposure Compensation if the
built-in flash is in the inserted position.
2
Select the desired compensation value by using
buttons.
• Exposure compensation can be set in 1/3 stop increments from +3.0
to -3.0 stops.
3
Press the
button again to apply the settings. (The color of the
compensation value will turn from orange to white and the Allocate
function guide will disappear)
function guide will disappear)
CAUTION!!
•
The exposure compensation will not disable automatically. After
taking the picture, set the compensation value to ±0.0 by above
procedure.
taking the picture, set the compensation value to ±0.0 by above
procedure.