SVAT Electronics IP200 User Manual

 

Fig.39. System Time 

“Time Between Automatic Updates” 
The administrator can set an interval for time synchronization. Select either 1, 3, 
12 hours or 1, 10 & 30 days. 
 
“Time Server” 
Choose the nearest Time Server to your WebCAM location.  The administrator 
can choose from the list of a maximum of 30 Time Servers. 
 
To add a new Timer Server the administrator must first make space by deleting 
some Time Servers.    Once this is done, the add dialog box will appear as below.   
Click “Back” to return to the System Settings Page. 

 

“Time Zone (Relative to GMT)” 
Select the appropriate time zone for your area. Click “Apply” to save. 
 
“System Time (yyyy/mm/dd hh:mm:ss)” 
This section is to manually set WebCAM System Time. The format is 
pre-determined  to: yyyy/mm/dd hh:mm:ss.    Click “Manual Adjust” to save any 
manual changes. 

 

 

Fig.40. Auto Restart setting 

“Auto Restart System Every” 
The administrator can choose to restart WebCAM at certain intervals (choose 
between minutes and hours only).  This will ensure that WebCAM will work 
smoothly.    Click “Apply” to save changes. 
 
“Manual Restart” 
Click “Restart Now” to restart the system immediately. 
 

 

“LED function” 
The administrator can enable or disable the LED (except the Power LED) on 
WebCAM here.    Click “Apply” to save settings.