SVAT Electronics CLEARVU4 User Manual

now you can see

CLEARVU4

30

Port Dynamic DNS
This section will explain how to associate your IP address with an easy-to-remember URL (domain name)
1.  Open Internet Explorer and type in 

2.  The instructions on creating a dynamic DNS may have changed since the writing of this 

guide. Create a new account by clicking the link “Create Account”

3.  Enter your preferred user name, email address, and password.

4.  Do not worry about the optional information. Agree to the Terms of Service by checking 

the boxes. Click Create Account.

2.  Press ENTER, and your DVR’s login window should pop up. If it does not pop up, your 

router is not properly forwarding the necessary port. This could be due to a number of 

problems including incorrect settings, presence of a firewall, or a DSL modem that has 
its own IP address. 

 

If  your  DSL  modem  has  its  own  internal  IP  address,  it  will  not  properly  forward  the 

necessary port. You may have to configure PPPoE settings in the DVR to match the 

settings provided to you by your Internet Service Provider (ISP). Consult your ISP for 

more information. SVAT technical support cannot troubleshoot modems, since changing 

these settings can potentially render your modem inoperable.

 

  See section 9.2 Advanced Network Setup for PPPoE configuration instructions. 

  You should also check all your network connections and go through the above steps 

again to make sure a configuration error was not made.