Sony DSLR-A230 User Manual

Note
• The 

 (Camera shake warning) indicator is displayed only in the modes that 

automatically set the shutter speed. This indicator is not displayed in M/S modes.

This SteadyShot function can reduce the effect of camera shake by the 
equivalent of approximately 2.5 to 3.5 increments of shutter speed.
The SteadyShot function is set to [On] in the default setting.

MENU button t  

t [SteadyShot] t [Off]

Note
• The SteadyShot function may not work optimally when the power has just been 

turned on or when the shutter button has been pressed all the way down without 
stopping halfway. Wait for the 

 (SteadyShot scale) indicator scale to go down, 

and then press the shutter button down slowly.

Due to potential camera shake, the 

 

(Camera shake warning) indicator flashes 
in the viewfinder. In this case, use a 
tripod or the flash.

 (Camera shake warning) indicator

Using the SteadyShot function

The 

 (SteadyShot scale) indicator 

shows the camera shake status. Wait until 
the scale becomes low, then start 
shooting.

 (SteadyShot scale) indicator