Sony MVC-CD500 User Manual
19
S
hoo
ting st
ill
im
ages
Initializing a disc
What is initialization?
Initialization is required to record images
on a disc.
When you perform finalization (page 85)
using your camera to view images through
a CD-ROM drive, initialization is also
automatically performed, and you can
continue to record images. Images recorded
before finalization remain on the disc.
on a disc.
When you perform finalization (page 85)
using your camera to view images through
a CD-ROM drive, initialization is also
automatically performed, and you can
continue to record images. Images recorded
before finalization remain on the disc.
,
Insert a new disc and set the
mode dial to
mode dial to
, then turn on
the power.
“Initialize Place on level surface” appears
on the LCD screen.
on the LCD screen.
To cancel initialization
Select [Cancel] with
V
on the control
button, then press
z
. After canceling the
initialization, open and close the disc cover,
then perform the procedure from step 1.
then perform the procedure from step 1.
•
You can also carry out this operation when the
mode dial is set to P, S, A, M, SCN or
mode dial is set to P, S, A, M, SCN or
.
•
You can also perform initialization using
(Disc Tool 1)
in the SET UP settings
,
Select [OK] with
v
on the
control button, then press
z
.
Initialization starts. Do not shake or strike
the camera during initialization.
the camera during initialization.
1
Mode dial
1
2
Initialize
Avoid any vibration
Ready to initialize
Initialize
Avoid any vibration
Initialize in progress
Initialize
Initialize complete