Sony MVC-CD500 User Manual

Page of 132
28
No indicator (Auto):
 The flash 
automatically pops up and strobes when the 
surroundings are dark.
r
 (Forced flash):
 The flash strobes 
regardless of the surrounding brightness.
r
 
(Slow synchro):
 The flash strobes 
regardless of the surrounding brightness. 
The shutter speed is slow in a dark place, so 
you can clearly shoot the background that is 
out of flash light.
r
 (No flash):
 The flash does not strobe.
If the menu is currently displayed, press MENU 
first so that the menu disappears.
You can also carry out this operation when the 
mode dial is set to P, S, A, M, SCN (
 
(Portrait mode)) or 
 (Clip Motion).
The recommended shooting distance using the 
flash is approximately 0.5 m to 5.0 m (19 3/4 
inches to 196 7/8 inches) (when [ISO] is set to 
[Auto]).
You can change the brightness of the flash with 
[Flash Level] in the menu settings (page 113)
(You cannot change the brightness of the flash 
while the mode dial is set to 
.)
When using the 
 (Slow synchro) or 
 (No 
flash) mode, the shutter speed becomes slower 
in dark places, so using a tripod is 
recommended.
While charging the flash, the  /CHG lamp 
flashes. After the charging is complete, the 
lamp goes out.
When you press the shutter button halfway 
down while the flash is strobing, the  /CHG 
lamp turns on.
You can mount an external flash on this camera 
(page 67).
Attaching a conversion lens (not supplied) may 
block the light from the built-in flash or cause 
the lens shadow to appear.
This setting is maintained even when the power 
is turned off.
To reduce the red-eye 
phenomenon when shooting 
live subjects
Set [Red Eye Reduction] to [On] in the SET 
UP settings (page 116). 
 indicator 
appears on the LCD screen, and the flash 
pre-strobes before shooting to reduce the 
red-eye phenomenon.
Red-eye reduction may not produce the desired 
effects depending on individual differences, the 
distance to the subject, if the subject does not 
see the pre-strobe, or other conditions. 
SL
SL
m