Sony DSLR-A580 User Manual

Notes
• Before using an Eye-Fi card, set up the wireless LAN access point and forwarding 

destination. For details, refer to the operating manual supplied with the Eye-Fi card.

• Eye-Fi cards are sold in the U.S.A, Canada, Japan, and some countries in the EU (as 

of May in 2010).

• For more information, please contact the manufacturer or vendor directly.
• Eye-Fi cards can be used only in the countries/regions where they were purchased. 

Use Eye-Fi cards in accordance with the law of the countries/regions where you 
purchased the card.

• Eye-Fi cards include a wireless LAN function. Do not insert any Eye-Fi cards in the 

camera when it is prohibited to do so, such as on an airplane. If there is an Eye-Fi 
card inserted in the camera, set [Upload Settings] to [Off]. 

 is displayed on the 

screen when [Upload Settings] is set to [Off].

• When you use a brand-new Eye-Fi card for the first time, copy the install file of Eye-

Fi manager recorded on the card to your computer before formatting the card.

• Use an Eye-Fi card after updating the firmware to the latest version. For details, refer 

to the manual that comes with the Eye-Fi card.

• The power save function of the camera does not work while it is uploading images.
• If 

 (error) is displayed, remove the memory card and reinsert it, or turn off then 

turn on the power again. If 

 appears again, the Eye-Fi card may be damaged.

• Wi-Fi network communication may be influenced by other communication devices. 

If the communication status is poor, move closer to the access point of the Wi-Fi 
network.

• For details on the file types that can be uploaded, refer to the operating instructions 

supplied with the Eye-Fi card.

• This product does not support the Eye-Fi “Endless Memory Mode.” Make sure that 

Eye-Fi cards that you insert into this product have “Endless Memory Mode” turned 
off.