Sony DSLR-A900 User Manual

165

For details, refer to the operating instructions supplied with the printer or
consult with the manufacturer of the printer.

A connection cannot be established.

• The camera cannot be connected directly to a printer that is not compliant

with the PictBridge standard. Consult the printer manufacturer as to
whether the printer is compliant with PictBridge or not.

• Set [USB connection] to [PTP] (page 152).
• Disconnect and connect the USB cable again. If an error message is

indicated on the printer, refer to the operating instructions supplied with the
printer.

Cannot print images.

• RAW images cannot be printed.
• Images shot using cameras other than this camera or images modified with

a computer may not be printed.

“---- -- --” is printed on the date-inserted part of the image.

• Images that do not have the recording data cannot be printed with the date

inserted. Set [Date imprint] to [Off] and print the image again (page 155).

The message “Set date and time?” appears when you turn on the camera.

• The camera has been left unused for sometime with a low battery or no

battery pack. Charge the battery pack and set the date again (page 27). If the
date setting is lost every time the battery pack is charged, consult your Sony
dealer or local authorized Sony service facility.

The number of recordable images does not decrease or decreases two at
a time.

• This is because the compression rate and the image size after compression

change depending on the image when you shoot a JPEG image (page 108).

PictBridge compliant printer

Others