Sony UPX-C300 User Manual

Page of 211
Operations (Shooting and Printing)
23
4
Press the PRINT button.
The print preview screen appears.
You can return to the auto-review screen (or 
playback screen) by pressing the MENU button.
You can use the reception indicator on the top left 
part of the screen to check the reception state.
The reception is good.
: The reception is weak and therefore it may 
take more time to send images.
Do not move the camera and printer until data 
transmission is finished.
5
Press the v or V control button to select a ID photo 
frame.
Press the v or V button repeatedly until the desired 
ID photo frame appears.
6
Specify the number of copies to print.
1) Press the B control button once.
Now you can select the number of copies to 
print.
2) Press the v or V control button to select the 
number of copies to print.
7
Press the COLOR/B&W button to select whether to 
print in color or black & white.
8
If necessary, adjust the size of the image to match 
the selected ID photo frame.
1) Press the ENTER button.
The ADJUST screen appears.
2) Press the AUTO FRAME button.
The image is automatically adjusted so that the 
face size of the subject fits the frame on the 
screen.
3) If necessary, use the following buttons to adjust 
the size of the image.
– You can press the zoom lever to magnify or 
reduce the image.
– You can press the control buttons (vVbB) to 
move the displayed part of the image.
4) Press the ENTER button to return to the print 
preview screen.
9
Press the PRINT button again.
Picture data are transmitted to the printer, and 
“TRANSMITTING” and the progress bar appear 
on the LCD.
While the CANCEL button is lit in orange, you can 
cancel data transmission by pressing the ENTER 
button.
When data transmission ends, the CANCEL button 
changes to gray. The printer checks the print pack 
then starts printing.
Notes
• Once the CANCEL button changes to gray, you 
cannot cancel the print operation.
• Do not touch any button on the camera while the 
CANCEL button is gray.
Once printing begins, “TRANSMISSION END. PUSH 
MENU KEY TO CONTINUE.” appears on the LCD of 
the camera. Press the MENU button to remove the 
message. 
When the mode switch is set to 
, the LCD returns to 
the auto-review display. Once printing ends, you can 
print the same picture again at a different size, color, etc.
You can also take another picture during printing. To 
take the next picture, press the release button halfway or 
press the zoom lever to turn off the auto-review display.
When the mode switch is set to 
, the LCD returns to 
the playback image.
When a picture is printed, it is ejected onto the paper tray 
on the printer.
An image number is printed at the bottom of the printed 
image. This is the same number that appeared at the top 
of the LCD during image playback.
Note
Do not allow printed sheets to accumulate on the paper 
tray. Be sure to remove sheets ejected onto the paper tray 
every five sheets.
Bluetooth
1. Sony UP-DX100  1
EU : Passpor t
3
45  35mm      8
Reception indicator
Number of prints
ID Photo Frame
Number of frames
Frame size
Printer name
Bluetooth indicator
 1)
1) Appears when the Bluetooth module is set to ON.