Manualsbrain.com
  1. Manuals
  2. Brands
  3. Sony
  4. UPX-C200
  5. User Manual

Sony UPX-C200 User Manual

Download
Page of 208
Bluetooth
52
Communication between the 
Camera and Printer Using the 
Bluetooth
For communication between the camera and printer with 
Bluetooth, the followings are required:
• The same passkey set on the camera and printer
• The 
 lamp lit
Checking the current settings
You can check the current passkey settings on the 
camera and printer.
Settings on the camera
1
Display the Setup display.
For details on displaying the Setup display, see 
“Displaying the Setup display” on page 34.
2
Select Bluetooth by pressing v or V of the control 
button.
3
Press ENTER of the control button.
The Bluetooth display appears.
4
Select PROPERTY by pressing v or V of the 
control button.
5
Press ENTER of the control button.
The Property display appears, and you can check 
the passkey and address.
6
Press ENTER of the control button.
To exit the menu operation, press the MENU button.
Settings on the printer
1
Turn on the printer.
2
Press the MENU button.
3
Press V of the control button to display Bluetooth 
SETTING [>>] on the operation display.
4
Press B of the control button.
The Bluetooth address appears.
5
Press V of the control button to display PASSKEY 
INPUT [>>] on the operation display.
6
Press B of the control button.
The passkey currently set appears on the PASSKEY 
INPUT display.
7
Press the EXEC button.
To exit the menu operation, press the MENU button.
Changing the passkey settings
You can change the passkey as required.
On the UPX-C200 and separately available UP-DX100 
Digital Photo Printer, the same passkey has been set at 
the factory. For communication security, it is 
recommended to change the passkey for your system.
For details on changing settings, refer to the Operating 
Instructions (Advanced Operations).
If the 
 lamp is off
If the 
 lamp is off, the Bluetooth function is 
turned off. You can activate the function following the 
procedures below.
To turn on the 
 lamp of the camera
1
Display the Setup display
For details on displaying the Setup display, see 
“Displaying the Setup display” on page 34.
2
Select Bluetooth by pressing v or V of the control 
button.
3
Press ENTER of the control button.
4
Select MODULE by pressing v or V of the control 
button.
5
Press ENTER of the control button.
The BT MODULE POWER display appears.
6
Check that ON is selected, then press ENTER of the 
control button.
The 
 lamp lights.
To turn on the 
 lamp of the printer
1
Press the MENU button.
2
Press V of the control button to display “Bluetooth 
SETTING [>>].”
3
Press B of the control button.
“Bluetooth ADDR None” appears.
4
Press V of the control button to display “MODULE 
POWER [>>].”
5
Press B of the control button.