Sony XCD-SX90CR User Manual
2-2
XCD-U100/SX90/V60
XCD-U100CR/SX90CR/V60CR
5.
Click the “Flash” tab.
6.
Click the [Restart|the|Camera] button to restart.
7.
Check if the serial number and Node Unique ID on the
model nameplate correspond to each number in the
model nameplate correspond to each number in the
IIDC control window. If not, perform the procedure
from step 1 again.
from step 1 again.
Flash tab
[Restart|the|Camera]
button
Camera
IEEE1394b
cable
cable
IEEE1394b
Personal computer
Pattern box
PTB-700
PTB-700
Clear chart
C-mount
lens
lens
2-2. Camera Adjustment
n
Perform the adjustment when replacing the front panel
Perform the adjustment when replacing the front panel
assembly.
Required equipment
. Personal computer (PC)
. IEEE1394b cable(Commercially available products)
. IIDC_CAM**** software:
. IEEE1394b cable(Commercially available products)
. IIDC_CAM**** software:
J-7120-410-A
(
**** represents the version number.)
. Pattern box PTB-700:
J-6431-850-A
. Clear chart (manufactured by Kenko): J-6080-621-A
. C-mount lens VF2509 (Canon) or equivalent
. C-mount lens VF2509 (Canon) or equivalent
Connection
Preparation
1.
Connect each device as shown in the above illustra-
tion.
tion.
2.
Install the IIDC_CAM
**** software in an arbitrary
place of PC.