Sony CCU-TX50 User Manual
Notes on Use / Specifications
17
Notes on Use
Use and storage locations
Avoid using or storing the unit in the following places:
• Where it is subject to extremes of temperature
• Where it is subject to extremes of temperature
(operating temperature: +5ºC to +40ºC (41ºF to
104ºF)).
Note that in summer the temperature in a car with the
windows closed can reach 50ºC (122ºF).
104ºF)).
Note that in summer the temperature in a car with the
windows closed can reach 50ºC (122ºF).
• Very damp or dusty places.
• Where rain is likely to reach the unit.
• Places subject to severe vibration.
• Near strong magnetic fields
• Where rain is likely to reach the unit.
• Places subject to severe vibration.
• Near strong magnetic fields
Near transmitting stations generating
strong radio waves.
strong radio waves.
Avoid violent impacts
Dropping the unit, or otherwise imparting a violent
shock to it, is likely to cause it to malfunction.
shock to it, is likely to cause it to malfunction.
Do not cover with cloth
While the unit is in operation, do not cover it with a cloth
or other material. This can cause the temperature to rise,
leading to a malfunction.
or other material. This can cause the temperature to rise,
leading to a malfunction.
After use
Turn the POWER switches on the unit and camera
control unit off.
control unit off.
Care
If the body of the unit is dirty, wipe it with a dry cloth.
For severe dirt, use a soft cloth steeped in a small amount
of neutral detergent, then wipe dry. Do not use volatile
solvents such as alcohol or thinners, as these may
damage the finish.
For severe dirt, use a soft cloth steeped in a small amount
of neutral detergent, then wipe dry. Do not use volatile
solvents such as alcohol or thinners, as these may
damage the finish.
Specifications
General
Power consumption
100 - 240 V AC, 50/60 Hz,
maximum 1.3 A
maximum 1.3 A
Peak inrush current
(1) Power ON, current probe method:
50 A (240V)
(2) Hot switching inrush current,
measured in accordance with
European standard EN55103-1:
10 A (230V)
European standard EN55103-1:
10 A (230V)
Cable length
Maximum 750 m (
φ 8.5 mm)
Operating temperature
+5ºC to +40ºC (41ºF to 104ºF)
Dimensions
200 × 124 × 365 mm
(8 × 5 × 13 7/8 in.) (w / h / d)
not including projecting parts
(8 × 5 × 13 7/8 in.) (w / h / d)
not including projecting parts
Mass
Approx. 5.5 kg
Input signals
REFERENCE
BNC type (loop-through)
VBS/BS, 1.0 Vp-p, 75 ohms automatic
VBS/BS, 1.0 Vp-p, 75 ohms automatic
terminated
RET-1/2/3
1)
BNC type (1 each, loop-through)
VBS, 1.0 Vp-p, 75 ohms automatic
VBS, 1.0 Vp-p, 75 ohms automatic
terminated
PROMPTER
1)
BNC type (loop-through)
VBS, 1.0 Vp-p, 75 ohms
VBS, 1.0 Vp-p, 75 ohms
1) The same signal is input to RET-3 and PROMPTER.
Output signals
VBS 1/2/3
BNC type (1 each)
VBS, 1.0 Vp-p, 75 ohms
VBS, 1.0 Vp-p, 75 ohms
SDI
BNC type (3)
SDI format, 270 Mbps, SMPTE 259M
SDI format, 270 Mbps, SMPTE 259M
(CCU-TX50)/CCIR656-III (CCU-
TX50P)
TX50P)
Y/R-Y/B-Y video
2)
BNC type (1 each)
Y: 1.0 Vp-p, 75 ohms
R-Y/B-Y: U.S.A. and Canada:
Y: 1.0 Vp-p, 75 ohms
R-Y/B-Y: U.S.A. and Canada:
700 mVp-p, 75 ohms
Europe: 525 mVp-p, 75 ohms
R/G/B video
2)
BNC type (1 each)
700 mVp-p, 75 ohms
700 mVp-p, 75 ohms
PIX
BNC type (1)
1.0 Vp-p, 75 ohms
1.0 Vp-p, 75 ohms
WF
BNC type (1)
NTSC: 714 mVp-p, 75 ohms
NTSC: 714 mVp-p, 75 ohms