Sony XCD-V60CR User Manual

1-6

XCD-U100/SX90/V60

XCD-U100CR/SX90CR/V60CR

Spacers

Spacers

Optical dust cover

XCD-V60/SX90/U100

XCD-V60CR/SX90CR/U100CR

Filter bracket

Lens mount cap

Lens mount cap

PM2 x 4

M1.7 x 4

Infrared cut filter

Filter bracket

M1.7 x 4

2

M1.7 x 4

BI-217/218/219 board

Front panel

Boss

Sealing rubber

Front panel

1

M1.7 x 4

Evaporation 
surface

8.

Attach the lens mount cap, filter bracket, optical dust

cover, infrared cut filter and sealing rubber in the
reverse order of steps 1 to 7.

Attach the infrared cut filter so that its evaporation surface
is placed on the side of BI-217/218/219 board.

When you put the cotton-tipped swab on the surface of the
infrared cut filter, the image of the cotton-tipped swab is

reflected as if the tips contact each other (state being
reflected in a mirror) if it is the evaporation surface.

Attach the sealing rubber to the boss side with its cham-

fered portion placed upward.
(Refer to the illustration on the left.)

1.

Remove the upper case and lower case.

(Refer to Section 1-2-1.)

2.

Remove the front panel assembly. (Refer to Section 1-2-3.)

3.

Remove the lens mount cap.

4.

Remove the two screws (M1.7 

x 4), then remove the

filter bracket and optical dust cover.

XCD-V60CR/SX90CR/U100CR:
Remove the two screws (M1.7 

x 4), then remove the

filter bracket and infrared cut filter.

5.

Remove the two screws (M1.7 

x 4).

n
When attaching the screws, attach the screw 1 first

and then 2.

6.

Remove the two screws (PM2 

x 4), then remove the

BI-217/218/219 board and spacers.
n
When attaching the spacers, be sure to attach them
back to the original positions.

7.

Remove the sealing rubber.

Infrared cut filter

Cotton-tipped 
swab

Evaporation 
surface

Image that is reflected as 
if the tips contact each other

Image of 
cotton-tipped 
swab