Sony HDR-SR11E User Manual
8
Getting Started
Step 1: Charging the battery pack
You can charge the “InfoLITHIUM”
battery pack (H series) after
attaching it to your camcorder.
battery pack (H series) after
attaching it to your camcorder.
b
Notes
• You cannot attach any “InfoLITHIUM” battery
pack other than the H series to your camcorder.
1
Connect the AC Adaptor to the
DC IN jack on the Handycam
Station.
DC IN jack on the Handycam
Station.
Be sure that the v mark on the DC plug
is facing up.
is facing up.
2
Connect the power cord (mains
lead) to the AC Adaptor and the
wall outlet (wall socket).
lead) to the AC Adaptor and the
wall outlet (wall socket).
3
Turn the POWER switch in the
direction of the arrow to OFF
(CHG) (the default setting).
direction of the arrow to OFF
(CHG) (the default setting).
4
Attach the battery pack by sliding
it in the direction of the arrow
until it clicks.
it in the direction of the arrow
until it clicks.
5
Set the camcorder onto the
Handycam Station securely.
Handycam Station securely.
The /CHG (charge) lamp lights up and
charging starts. The /CHG (charge)
lamp turns off when the battery pack is
fully charged. Remove the camcorder
from the Handycam Station.
charging starts. The /CHG (charge)
lamp turns off when the battery pack is
fully charged. Remove the camcorder
from the Handycam Station.
To remove the battery pack
Turn the POWER switch to OFF (CHG).
Slide the BATT (battery release) lever and
remove the battery pack.
Slide the BATT (battery release) lever and
remove the battery pack.
4
3
1
2
5
5
POWER switch
/CHG lamp
DC IN jack
DC plug
AC Adaptor
Power cord (Mains lead)
To the wall outlet
(wall socket)
(wall socket)
Battery pack
BATT (battery release) lever