Sony DSCW620R User Manual

Page of 48
GB
22
On use and care
Avoid rough handling, disassembling, modifying, physical shock, or impact such as 
hammering, dropping or stepping on the product. Be particularly careful of the lens.
Notes on recording/playback
• Before you start recording, make a trial recording to make sure that the camera is 
working correctly.
• The camera is neither dust-proof, nor splash-proof, nor water-proof.
• Avoid exposing the camera to water. If water enters inside the camera, a 
malfunction may occur. In some cases, the camera cannot be repaired.
• Do not aim the camera at the sun or other bright light. It may cause the 
malfunction of the camera.
• If moisture condensation occurs, remove it before using the camera.
• Do not shake or strike the camera. It may cause a malfunction and you may not be 
able to record images. Furthermore, the recording media may become unusable or 
image data may be damaged.
Do not use/store the camera in the following places
• In an extremely hot, cold or humid place
In places such as in a car parked in the sun, the camera body may become 
deformed and this may cause a malfunction.
• Under direct sunlight or near a heater
The camera body may become discolored or deformed, and this may cause a 
malfunction.
• In a location subject to rocking vibration
• Near a location that generates strong radio waves, emits radiation or is strongly 
magnetic place. Otherwise, the camera may not properly record or play back 
images.
• In sandy or dusty places
Be careful not to let sand or dust get into the camera. This may cause the camera to 
malfunction, and in some cases this malfunction cannot be repaired.
On carrying
Do not sit down in a chair or other place with the camera in the back pocket of your 
trousers or skirt, as this may cause malfunction or damage the camera.
Notes on the screen and lens
The screen is manufactured using extremely high-precision technology so over 
99.99% of the pixels are operational for effective use. However, some tiny black 
and/or bright dots (white, red, blue or green) may appear on the screen. These dots 
are a normal result of the manufacturing process, and do not affect the recording.
Notes on using the camera