Sony DSCT2L User Manual

Page of 44
12
2 Inserting the battery pack
1
Open the battery/“Memory Stick Duo” cover.
2
Insert the battery pack.
3
Close the battery/“Memory Stick Duo” cover.
[
To check the remaining battery charge
Press POWER button to turn on and check the remaining battery charge on the LCD screen.
• If the NP-FD1 battery pack (not supplied) is used, the minute display (
 60 Min) is also shown after 
the battery remaining indicator.
• It takes about one minute until the correct remaining charge indicator appears.
• The remaining charge indicator may not be correct depending on conditions of use and circumstances.
• The Clock Set screen appears when you turn on the camera for the first time (page 14).
Battery/“Memory Stick Duo” 
cover
Align the v mark of the battery slot with the v 
mark on the side of the battery pack. Press and 
hold the battery eject lever and insert the 
battery pack.
Battery eject 
lever
Open
Close
Remaining 
charge 
indicator
Status
Sufficient 
power 
remaining
Battery 
almost fully 
charged
Battery half 
full
Battery low, 
recording/
playback 
will stop 
soon.
Change the battery 
with fully charged 
one, or charge the 
battery. (The warning 
indicator flashes.)