Sony DSC-T1 User Manual
99
Tr
ou
bl
bl
e
s
hoo
ting
Self-diagnosis display
– If a code starting with an alphabet
letter appears
letter appears
Your camera has a self-diagnosis display.
This function displays the camera condition
on the LCD screen with a combination of a
letter and four numerical digits. If this
occurs, check the following code chart and
attempt the corresponding corrective
actions. The last two digits (indicated by
ss) will differ depending on the state of
the camera.
This function displays the camera condition
on the LCD screen with a combination of a
letter and four numerical digits. If this
occurs, check the following code chart and
attempt the corresponding corrective
actions. The last two digits (indicated by
ss) will differ depending on the state of
the camera.
C:32:ss
Self-diagnosis display
If you are unable to solve the problem even
after trying the corrective actions a few
times, contact your Sony dealer or local
authorized Sony service facility.
after trying the corrective actions a few
times, contact your Sony dealer or local
authorized Sony service facility.
Code
Cause
Corrective action
C:32:
ss
There is trouble with your
camera’s hardware.
camera’s hardware.
Turn the power off and on again (page 16).
C:13:
ss
The camera cannot read or write
data on the “Memory Stick Duo.”
data on the “Memory Stick Duo.”
Re-insert the “Memory Stick Duo” several
times.
times.
An unformatted “Memory Stick
Duo” is inserted.
Duo” is inserted.
Format the “Memory Stick Duo” (page 41).
The inserted “Memory Stick
Duo” cannot be used with your
camera, or the data is damaged.
Duo” cannot be used with your
camera, or the data is damaged.
Insert a new “Memory Stick Duo”
(page 19).
(page 19).
E:61:
ss
E:91:
ss
A camera malfunction that you
cannot reverse has occurred.
cannot reverse has occurred.
Press the RESET button (page 88) located
on the lower right side of the control button,
then turn on the power again.
on the lower right side of the control button,
then turn on the power again.