Sony DSCRX10/B User Manual
Help Guide | Capturing a basic white color in [Custom Setup] mode
http://www.sony-asia.com/microsite/cybershot_userguides/DSC-RX10/eng/contents/TP0000226592.html[24/11/2013 16:02:35]
Digital Still Camera
DSC-RX10
Capturing a basic white color in [Custom Setup] mode
In a scene where the ambient light consists of multiple types of light sources, it is
recommended to use the custom white balance in order to accurately reproduce the whiteness.
recommended to use the custom white balance in order to accurately reproduce the whiteness.
1. MENU →
(Camera Settings) → [White Balance] → [Custom Setup].
2. Hold the camera/camcorder so that the white area fully covers the AF area located in the
center, and then press
on the center of the control wheel.
The calibrated values (Color Temperature and Color Filter) are displayed.
3. Select a registration number using the right/left side of the control wheel.
The monitor returns to the recording information display while retaining the memorized
custom white balance setting.
custom white balance setting.
Note
The message [Custom WB Error] indicates that the value is higher than the expected range,
when the flash is used on a subject with too bright colors in the frame. If you register this
value, the
when the flash is used on a subject with too bright colors in the frame. If you register this
value, the
indicator turns yellow on the recording information display. You can shoot at
this point, but it is recommended that you set the white balance again to get a more
accurate white balance value.
accurate white balance value.
4-477-079-12(1)
Copyright 2013 Sony Corporation
How to Use