Sony DSC User Manual
24-GB
Using the supplied accessories (USB cable)
You can send image data from your camera to an IBM PC/AT compatible PC or to a
Macintosh on which the Mac OS is running, using the supplied USB cable and USB
driver software.
Install the USB driver software (supplied) following the instructions below.
Macintosh on which the Mac OS is running, using the supplied USB cable and USB
driver software.
Install the USB driver software (supplied) following the instructions below.
For Windows 98 users
1
Turn on the power of your personal computer on which the
Windows 98 is running.
2
Set the supplied CD-ROM of the USB driver software into the CD-
ROM drive.
3
Connect one end of the USB cable to the USB jack and the other
end to the USB connector on your personal computer as
illustrated.
illustrated.
4
Insert “Memory Stick” into your camera, and connect the AC
power adaptor/charger to your camera.
5
Turn on the power of your camera, and make sure if the USB cable
is connected to the USB jack on your camera.
“PC MODE USB” appears on the LCD screen, and your camera turns to standby for
communication.
communication.
Personal computer
to the USB jack*
USB cable* (supplied)
Digital still camera
to the USB connector
* These USB cable and jack are designed for this
digital still camera only.
Recommended OS
Windows 95/98/CE
Mac OS 7.5 or later
Mac OS 7.5 or later
Usable models
PC card type: Type II
Standard interface: PC Card ATA/
Standard interface: PC Card ATA/
True IDE