Sony DSC-T3/T33 User Manual
66
DSC-T3/T33 2-548-269-11(1) [OpenType FONT]
Adjusting the flash
level
— Flash Level
You can adjust the amount of flash light.
Before operation
Set
(Camera) in the menu to other than
[Auto] (pages 53 and 120).
Control button
Mode switch
MENU
Set the mode switch to .
Press MENU.
The menu appears.
Select [ ] (Flash Level) with
/, then select the desired
setting with
setting with
/.
+: Makes the flash level higher than
normal.
Normal: Normal setting.
normal.
Normal: Normal setting.
–: Makes the flash level lower than
normal.
normal.
• You may not be able to set the flash level a
depending on the Scene Selection mode (page
43).
43).
Shooting
continuously
This mode is used for continuous shooting.
The maxium number of images you can
shoot per one shooting depends on the
image size and image quality settings.
The maxium number of images you can
shoot per one shooting depends on the
image size and image quality settings.
Speed Burst (
S
)
You can shoot images with a short interval
(approx. 0.33 second).
(approx. 0.33 second).
Burst (
)
The shooting interval (approx. 0.83
seconds) becomes longer than Speed
Burst, but even more images can be shot
continuously.
seconds) becomes longer than Speed
Burst, but even more images can be shot
continuously.
Control button
Mode switch
MENU
• When the battery power decreases with use or
the capacity of the “Memory Stick Duo” is full,
recording stops even if you press and hold the
shutter button.
recording stops even if you press and hold the
shutter button.